Standard Compression Mounts
Description
These rugged mounts are normally used for vertically applied loads to prevent the transmission of noise and vibration caused by the rotation of unbalanced equipment such as centrifuges, blowers, pumps, vibrators and air handling systems. They effectively isolate disturbing frequencies as low as 900 rpm (15 Hz), providing up to 90% isolation at 1,500 rpm (25 Hz). Their elastomer-in-compression design effectively interrupts noise transmission paths to prevent sounding board effects.
Natural Frequencies as low as 6 Hz at maximum loads
Constructed of Neoprene and steel
Metric threads available
